|
|
|
|
|
Standard Base Coat
|
| STANDARD BASE COAT is a 100% acrylic adhesive and base coat that is field-mixed with Type I or Type II Portland cement.
|
|
| Features |
Benefits |
| Good build |
Covers reinforcing mesh easily |
| Applicator favorite for 30 years |
Proven reliability |
| Familiar 1:1 mixing ratio |
Easy to mix |
| Water based |
Safe, non-toxic; clean up easily with soap and water |
|
|
| Uses |
| SENERGY® STANDARD BASE COAT is designed for use as the adhesive and/or base coat in several wall systems from Senergy. |
STANDARD BASE COAT is used with the Senerflex® Wall System to adhere expanded polystyrene insulation board to the following acceptable substrates:
- SENERSHIELD®
- SENERSHIELD-R
- Unpainted and unglazed concrete or unit masonry
- PermaBase™ brand cement board (or other ASTM C1325 Type A Exterior approved cement boards)
- Poured concrete/unit masonry
- Fiberock® Aqua-Tough™ sheathing
- e²XP™ by National Gypsum, GlasRoc® by Certainteed and DensGlass™ exterior sheathing (ASTM C1177)
- Gypsum sheathing (ASTM C79/C1396)
- New and untreated Exposure 1 or exterior plywood sheathing (Grade C-D or better)
- Exposure 1 OSB
Note: Wood-based sheathing substrates require priming with SENERPRIME™. |
| STANDARD BASE COAT is used with Senerflex® EIFS, Senturion™ I, II, and III residential EIFS, Senergy Cement-Board Stucco™ System and all Senergy Textured Acrylic Surfacing Systems to embed CORNER MESH and SENERGY REINFORCING MESH. |
| STANDARD BASE COAT will also adhere expanded polystyrene insulation board (EPS) to expanded polystyrene insulation board enabling the build out of architectural shapes and details. |
|
| Packaging |
Coverage |
27.2 kg per 19-liter pail
(60 lbs. per 5-gallon pail) |
Approximate coverage rates are as follows:
Adhere EPS insulation board to substrate:
14.8 m² (160 ft²) per pail via notched trowel method,
16.7 m² (180 ft²) per pail via ribbon & dab method |
|
Embed FLEXGUARD 4:
26 m²(280 ft²) per pail
Embed INTERMEDIATE 12:
18.5 m² (200 ft²) per pail
Embed HI-IMPACT 20 &
FLEXGUARD4: 14.8 m² (160 ft²) per pail |
|
Adhere EPS insulation board to substrate and embed FLEXGUARD 4: 11.1 m² (120 ft²) per pail |
|
|
|
BASFCC.Moss.Core.wsp 1.0.0.857 - S:37 T:3/10/2010 8:46:15 AM
|
|