Air/Water-Resistive Barriers & DrainageAdhesive / Base Coat
Alpha Base CoatAlpha Dry Base CoatAlpha Dry-S Base CoatAlpha Genie Base CoatCool-Set Alpha Dry AdhesiveSandable Skim CoatSenerprimeSenerquick AdhesiveStandard Base CoatSurface Stabilizer WBXtra-Stop Base Coat
Reinforcing MeshStucco ProductsTextured FinishesChroma FinishCoatingsWarranties
BASF Global|Construction Chemicals|Contact|Sitemap|Print
  Search
About Us|Sustainability|Wall Systems|Products|Tech Support|Literature|Colors & Textures|Distributors|Submittals
Senergy EIFS and stucco header
Home >> Products >> Adhesive / Base Coat >> Xtra-Stop Base Coat

Xtra-Stop Base Coat 

XTRA-STOP BASE COAT is a 100% acrylic adhesive and base coat that is field-mixed with Type I or Type II Portland cement. It is noted for its water resistant properties.

 

 
Features Benefits
Highly water resistant Use to waterproof sloped parapets and window sills
Smooth, creamy consistency Trowels easily, speeding mesh embedment, reducing applicator arm fatigue and increasing job-site productivity
Familiar 1:1 mixing ratio Easy to mix—less chance of error
Water based Safe, non-toxic; clean up easily with soap and water
Literature Downloads
PDF logo Product Bulletin
PDF logo MSDS
PDF logo Technical Bulletin:
Base Coats and Adhesives Uses & Applications
PDF logo Technical Bulletin:
EIFS and Associated Products Test Results
PDF logo Technical Bulletin:
The Importance of Using the Proper Notched Trowel with EIFS
Uses
SENERGY® XTRA-STOP BASE COAT is designed for use as the adhesive and/or base coat in several wall systems from Senergy.
XTRA-STOP BASE COAT is used with the Senerflex® Wall System to adhere expanded polystyrene insulation board to the following acceptable substrates:
  1. SENERSHIELD®
  2. SENERSHIELD-R
  3. Unpainted and unglazed concrete or unit masonry
  4. PermaBase™ brand cement board (or other ASTM C1325 Type A Exterior approved cement boards)
  5. Poured concrete/unit masonry
  6. Fiberock® Aqua-Tough™ sheathing
  7. e²XP™ by National Gypsum, GlasRoc® by Certainteed and DensGlass™ exterior sheathing (ASTM C1177)
  8. Gypsum sheathing (ASTM C79/C1396)
  9. New and untreated Exposure 1 or exterior plywood sheathing (Grade C-D or better)
  10. Exposure 1 OSB
Note: Wood-based sheathing substrates require priming with SENERPRIME™.
SENERGY® XTRA-STOP BASE COAT is used with Senerflex® EIFS, Senturion™ I, II, and III residential EIFS, Senergy Cement-Board Stucco™ System and all Senergy Textured Acrylic Surfacing Systems to embed CORNER MESH and SENERGY REINFORCING MESH.
XTRA-STOP BASE COAT will also adhere expanded polystyrene insulation board (EPS) to expanded polystyrene insulation board enabling the build out of architectural shapes and details.
Packaging Coverage
27.2 kg per 19-liter pail
(60 lbs per 5-gallon pail)		 Approximate coverage rates are as follows: Adhere EPS insulation board to substrate:
14.8 m² (160 ft²) per pail via notched trowel method
16.7 m² (180 ft²) per pail via ribbon & dab method

Embed FLEXGUARD 4:
26 m² (280 ft²) per pail
Embed INTERMEDIATE 12:
18.5 m² (200 ft²) per pail
Embed HI-IMPACT 20 &
FLEXGUARD 4: 14.8 m²(160 ft²) per pail

Adhere EPS insulation board to substrate and embed FLEXGUARD 4: 11.1 m² (120 ft²) per pail
DisclaimerCreditsData ProtectionCopyright 2009 BASF SE
BASFCC.Moss.Core.wsp 1.0.0.8 - S:38 T:5/18/2013 11:00:58 AM