Products | Adhesive/Base Coat
Use this chart as a guide in selecting the optimal base coat/adhesive for your project.
 |
|
|
|
|
|
|
|
| For use with the Senerflex Wall Systems to adhere expanded polystyrene insulation board to new and untreated Exposure 1 exterior grade plywood and Exposure 1 OSB substrates. |
Yes
|
Yes. Condition of plywood and OSB with SENERPRIME is required
|
| For use with the Senerflex Wall Systems to adhere expanded polystyrene insulation board to the following acceptable substrates: unpainted and unglazed concrete or unit masonry, DensGlass exterior sheathing (ASTM C1177), PermaBase cement-board or other Type A Exterior cement board (ASTM C1325), or Exterior gypsum sheathing (ASTM C79/ASTM C1396) |
Yes
|
Yes
|
Yes
|
Yes
|
Yes
|
Yes
|
Yes
|
| For use with the Senerflex Channeled Adhesive Design/ Channeled Insulation Design Option to adhere expanded polystyrene insulation board to acceptable substrates that have been protected with an application of Senershield or Senershield-R (protection includes joint and wall penetration treatments).Increased resistance to airborne pollutants. |
No
|
Yes
|
Yes
|
Yes
|
Yes
|
Yes
|
Yes
|
| To adhere expanded polystyrene insulation board to expanded polystyrene insulation board.Bridges hairline cracks smaller than 1/32". |
No
|
Yes
|
Yes
|
Yes
|
Yes
|
Yes
|
Yes
|
| For use with Senerflex, Senturion, Cement-Board Stucco Wall Systems and Senergy Exterior Surfacing Systems to embed Senergy Corner mesh and Reinforcing Mesh. |
No
|
Yes
|
Yes
|
Yes
|
Yes
|
Yes
|
No
|
| For leveling masonry, stucco, and other cementitious substrates to a maximum thickness of 6 m (1/4"). |
No
|
No
|
No
|
No
|
Yes
|
No
|
No
|