|
|
|
|
|
WS Flash™
|
|
WS FLASH™ is a patented, 30-mil thick, self-sealing, self-healing composite membrane of polyester fabric and rubberized asphalt.
WS FLASH™ is compatible with Senergy Base Coats and SENERSHIELD™.
WS FLASH™ is supplied in rolls, on release paper, for easy application.
|
|
| Features |
Benefits |
| Self-sealing, self-healing |
Maintains a seal when penetrated by fasteners |
| Senershield and Senergy Base Coats can be applied to polyester face |
Use as part of adhesively applied EIFS |
| Supplied in rolls on release paper |
Easy application |
|
|
| Uses |
| WS FLASH™ is used as a combination air and weather barrier and/or flashing at sills, rough openings, deck framing, etc. |
| It is also used as an air/water-resistive barrier over primed, approved sheathing joints. Senergy Base Coats and SENERSHIELD® can be directly applied to the polyester fabric side of the WS FLASH™ membrane. |
| It is also used as an expansion joint seal over SENERSHIELD™ |
FLASHING PRIMER is to be used under WS FLASH membrane on these acceptable substrates and other
surfaces:
- Wood framing (Note: Verify adhesion before applying to wood that has been treated in any way.)
- ASTM C1177 sheathings, e.g. e2XP™, GlasRoc®, Securock™ and DensGlass™.
- Water-resistant core gypsum sheathing (ASTM C79/ASTM C1396)
- Cement-board (ASTM C1325 Type A Exterior)
- Masonry
- Exposure 1 or exterior plywood sheathing
- Exposure 1 OSB
- Steel framing
- WS FLASH (itself)
- BASFWall Systems Air/Water-Resistive Barriers
|
|
|
|
| Packaging |
Coverage |
SENERFLASH 4:
10.2 cm x 30.5 m
(4" x 100')
9 rolls per carton |
SENERFLASH 4:
274.3 Lin m (900 Lin ft)
per carton |
SENERFLASH 9:
22.9 cm x 30.5 m
(9" x 100')
4 rolls per carton
|
SENERFLASH 9:
121.9 Lin m (400 Lin ft)
per carton |
|
|
|
BASFCC.Moss.Core.wsp 1.0.0.8 - S:38 T:6/19/2013 7:19:23 PM
|
|