|
|
|
|
|
Specialty Finishes
|
SPECIALTY FINISHES make huge contributions to design flexibility. AURORA STONE is troweled and.or sprayed to create the look of monu-mental stones.
TC-100 contains small ceramic spheres that can yield a rough or smooth stone appearance, depending upon application method. BOREALIS and ALUMINA contain mica chips, which contribute to the sparkling look of natural stone. METALLIC creates the look of reflec-tive metal panels. ENCAUSTO VERONA contains fine aggregates for a smoother finish that is used when a mottled appearance is desired.
All SPECIALTY FINISHES are 100% acrylic polymer finishes with advanced technology to improve long-term performance and dirt pick-up resistance on exterior and interior walls.
|
|
| Features |
Benefits |
| Simulated stone look |
Supports design freedom; lowers cost |
| 100% acrylic polymer-based chemistry |
Provides long-term durability and weather chemistry resistance |
| Integral color |
Reduces maintenance and recoating |
| Weather resistant |
Repels water and resists wind-driven rain |
Seals existing, non-moving
hairline cracks |
Protects |
| Breathable |
Does not blister, peel or flake |
| Abrasion resistant |
Durable |
| Factory mixed |
Ready to use, no additives to mix |
| Water based |
Safe, non-toxic, clean up easily with soap and water |
| Does not require a sealer |
Saves time and money |
|
|
| Uses |
| SENERGY® SPECIALTY FINISHES can be hand-troweled to simulate stone or create a time-honored, mottled tone-on-tone look that achieves a soft and weathered patina over time. Senerflex Specialty Finishes provide a protective, weather-resistant and aesthetically pleasing surface color and texture for the Senergy Wall Systems. |
| SENERGY® SPECIALTY FINISHES can also be utilized as a textured finish for poured concrete or unit masonry, conventional stucco, Sentry Stucco Wall Systems, Senergy Cement-Board Stucco Systems, all Senergy Surfacing Systems, and interior veneer plaster or gypsum wallboard. |
|
| Packaging |
Coverage |
31.7 kg per 19-liter pail
(70 lbs per 5-gallon pail) |
Coverage rates may vary depending on the coating
texture porosity of substrate
and application techniques |
|
ENCAUSTO VERONA Finish:
23.2 m² (250 ft²) per pail applied in two coats. |
|
AURORA TC-100 Finish:
6.5–9.2 m² (70–100 ft²) per pail, depending upon method of application. |
|
BOREALIS Finish:
6.5–9.2 m² (70–100 ft²) per pail, depending upon method of application. |
|
AURORA STONE Finish:
6.5 m² (70 ft²) per pail at 3.2 mm (1/8") thickness, depending upon technique. |
|
METALLIC Finish:
Coverage varies depending upon type of Finish Coat textures and substrates utilized. |
|
ALUMINA Finish:
(Approximate) 8.4–9.2 m² (90–100 ft²) per pail. |
|
|
|
BASFCC.Moss.Core.wsp 1.0.0.838 - S:37 T:11/21/2009 10:45:27 PM
|
|