Senerlastic Plus Coating
SENERLASTIC PLUS Coating is a factory-mixed, 100% acrylic-based siliconized smooth elastomeric coating that provides excellent flexibility and weatherability and increased resistance to mildew growth.
Increases both water repellency and resistance to mold and mildew
Over 300% elongation
Bridges cracks and enhances performance
Low temperature flexibility
Enhances crack resistance
Excellent weather-proof coating
Protects against wind-driven rain
Resists blistering and peeling
Safe, non-toxic; clean up easily with soap and water
SENERLASTIC PLUS COATING is intended for use as a coating on exterior wall surfaces such as concrete, stucco, unit masonry, or compatible EIFS finish coat.
24.9 kg per 19-liter pail
(55 lbs per 5-gallon pail)
Coverage rates may vary depending on the coating texture, porosity of substrate and application techniques.
Two coats are recommended to obtain the maximum elastomeric properties and for substrates with a moderate texture. Total wet film thickness is 32 mils (16 mils DFT) at 50 ft²/gal (4.6m²/L) or 250 ft²/pail (23m²/pail).
Available in Senergy’s standard colors and custom colors.