​Senerlastic Plus Finish

SENERLASTIC PLUS Finish is a siliconized, factory-mixed, 100% acrylic-based, textured elastomeric finish that provides excellent flexibility, weatherability, and maximum resistance to mildew growth.



​Silicone enhanced

​Resists airborne pollutants and increases both water repellency and resistance to mold and mildew; cleans easier

​Bridges and seals non-moving hairline cracks up to 1/32"

​A component of a stucco repair system on the basis of its protective characteristics

​100% Acrylic polymer chemistry 

​Long-term durability and weather resistance

​Integral color

​Reduced maintenance and recoating

​Weather resistant

​Repels water and resists wind-driven rain

​High UV resistance

​Resists fading

​Abrasion resistant



​Doesn't blister, peel or flake


  • SENERLASTIC FINISH is primarily intended for use as a coating over non-textured exterior wall surfaces such as cured stucco, concrete and unit masonry.

  • SENERLASTIC FINISH can also be used to provide an aesthetically pleasing surface color and texture for poured concrete or unit masonry, Senergy Cement-Board Stucco System, Sentry Stucco Wall Systems, conventional stucco, all Senergy Surfacing Systems and certain insulating concrete forms.


31.7 kg per 19-liter pail
(70 lbs per 5-gallon pail)


Coverage rates may vary depending on the coating
texture, porosity of substrate
and application techniques Coverages shown are approximate.

Classic Finish:
13 m² (140 ft²) per pail

Fine Finish:
13 m² (140 ft²) per pail

Sahara Finish:
11.1 m² (120 ft²) per pail

Texture Finish: Coverage varies depending upon application

Colors & Textures

Available in Senergy’s standard colors and custom colors, in Senergy’s CLASSIC, FINE, SAHARA and TEXTURE Finishes.

Senerlastic Finish Product Bulletin Teaser Image

Senerlastic Finish Product Bulletin

Additional Downloads