​Reinforcing Mesh


FLEXGUARD REINFORCING MESHES are balanced, open-weave glass, fiber reinforcing mesh, twisted multi-end strands treated for compatibility with Senergy Base Coats.

A variety of FLEXGUARD REINFORCING MESH types are available to meet the different requirements of impact resistance at specific wall locations. FLEXGUARD REINFORCING MESH conform to MIL-Y-114OG.


FEATURES

BENEFITS

​Alkali resistance; compatible with all Senergy Base Coats 

​Maintains tensile strength and flexibility for long-term durability

​FLEXGUARD 4:
4 ounce/yd² mesh; rated as "Standard Impact Resistance" per EIMA Standard 101.86 

​A single-layer application of FLEXGUARD 4 provides reinforcement for wall
system areas not expected to receive abnormal abuse or traffic.

​INTERMEDIATE 6:
5.6 oz/yd²; rated as "Standard Impact Resistance" per EIMA Standard 101.86.

​A single-layer application of INTERMEDIATE 6 provides reinforcement for wall system areas not expected to receive abnormal abuse or traffic.

​INTERMEDIATE 12:
11 oz/yd²; rated as "Medium Impact Resistance" per EIMA Standard 101.86.
INTERMEDIATE 12 in combination with FLEXGUARD 4 yield a rating of "High Impact Resistance" per EIMA Standard 101.86. 

​INTERMEDIATE 12 is a versatile, intermediate weight mesh. While capable of being used for a complete single-layer application, it is often used in
conjunction with FLEXGUARD 4 or INTERMEDIATE 6 to offer added impact
resistance at specific areas (i.e. around doors or walkways).

​STRONG 15:
15 oz/yd²; rated as "Ultra High Impact Resistance" when per EIMA Standard
101.86 when used in combination with FLEXGUARD 4.

​STRONG 15 is a medium/heavy-weight mesh intended for areas expected to
receive traffic and abuse. (It requires a continuous and lapped overlay of FLEXGUARD 4 or INTERMEDIATE 6.)

​HI-IMPACT 20:
20 oz/yd²; rated as "Ultra High Impact Resistance" per EIMA Standard 101.86 when used in combination with FLEXGUARD 4 

​HI-IMPACT 20 is a heavy-weight mesh intended for areas expected to receive a high degree of traffic and abuse. (It requires a continuous and overlapped
layer of FLEXGUARD 4 or INTERMEDIATE 6.)

​CORNER MESH:
9.0 oz/yd²; pre-marked for easy bending.

​CORNER MESH is an intermediate-weight mesh for use at exterior corners
when added impact resistance or clean, crisp corners are desired. An overlay of FLEXGUARD 4, INTERMEDIATE 6 or 12 is required when CORNER MESH
is used.

Uses

SENERGY FLEXGUARD REINFORCING MESH is required for use with all Senerflex Wall Systems and Senturion Wall Systems and Senergy Cement-Board Stucco Systems and for EPS shapes on Sentry Stucco Wall Systems that use either EPS or polyisocyanurate insulation boards and for use over EPS shapes on all Senergy Wall Systems.

FLEXGUARD 4 and INTERMEDIATE 6 are also optional reinforcing enhancements for Sentry Ultra Stucco and Sentry Plus Stucco Wall System.

Packaging

  • FLEXGUARD 4 & INTERMEDIATE 6: 96.5. cm X 45.7 m (38" width X 150') rolls

  • FLEXGUARD 4: 122 cm x 45.7 m (48" X 150')

  • FLEXGUARD 4: 183 cm x 45.7 m (72" X 150')

  • INTERMEDIATE 12 & STRONG 15: 96.5 cm x 22.8 m (38" x 75')

  • HI-IMPACT 20: 99.0 cm x 22.8 m (39" x 75')

  • CORNER MESH: 22.9 cm x 45.7 m (9" x 150')

Coverage

  • FLEXGUARD 4 & INTERMEDIATE 6: 44.1 m² (475 ft²)

  • FLEXGUARD 4 (48" roll): 5.58 m² (600 ft²)

  • FLEXGUARD 4 (72" roll): 8.36 m² (900 ft²)

  • FLEXGUARD 4 (96" roll): 111.51m² (1200 ft²)

  • INTERMEDIATE 12 & STRONG 15: 22.1 m² (237.5 ft²)

  • HI-IMPACT 20: 22.6 m² (243.75 ft²) 



Senergy Reinforcing Mesh Product Bulletin Teaser Image

Senergy Reinforcing Mesh Product Bulletin